Skip To Content

About: CoastalFlange

What are Lap Joint Flanges?

A Stub end Flange or more commonly called Lap Joint Flanges are used with Stub Ends. A Stub End adapter slides thru the Flange and is welded to the pipe. The Lap Joint Flange is similar to the Slip On Flange except it is flat across the face and has a radius machined at the…

What is a Skirt Flange?

Skirt Flanges are just one of the Custom Engineered Pipe Flanges we produce here at Coastal Flange. A Skirt Flange is a Pipe Flange with a short piece of Pipe welded to it for use with cement lined pipe. The Skirt Flange is lined with a Cement-Mortar mix and is applied according to AWWA C…

What is a Stud Bolt for Pipe Flanges?

Stud bolts for flanges are the bolting material or fastener used to tighten the flange joint connection. ASME B16.5 Code The American Society of Mechanical Engineers (ASME) began creating code for the piping industry in 1922. ASME created B16, a universal standard for engineers, architects and manufacturers for the purpose of unifying and developing codes…

What are the Types of Flange Gaskets?

In Piping Systems a Flange Gasket is placed between two connecting Flanges to create a leak proof seal. The three primary types of Flange Gaskets are Non-metallic, Semi metallic and Metal Gaskets. Photo Provided by Project Materials The Non-metallic Flange Gaskets are used in low pressure, low temperature and noncritical service applications. These are supplied…

What is an Orifice Flange?

The Orifice Flange is used to measure the flow of product through the piping system. When the Orifice Plate is installed there is a restriction of flow creating a differential pressure and this is used to measure the flow rate of liquids, steam or gases. The Orifice Plate is a thin plate with a center…

What are the Five basic Flange Face Finishes?

What are the 5 Basic Flange Face Finishes? The Five basic Finishes for ANSI B16.5 and ASME B16.47 Flanges are the Stock Finish, Spiral Serrated Finish, Concentric Serrated Finish, Smooth Finish and Cold Water Finish. 1. The Stock Flange Finish The Stock Flange Finish is a continuous groove produced by using a 1/16” radius round…

What is a Long Weld Neck Flange?

A Long Weld Neck Flange is an integral self-reinforcing Flange connection primarily for ASME Pressure Vessel applications. The Long Weld Neck (LWN) Flange  was designed to be used in place of a Weld Neck Flange and piece of pipe for a bolt up connection to the vessel. This design reduced the stress on the neck…

What are the 6 most common flanges?

The following are the 6 types of flanges most common flanges in process piping systems. 1. Slip On As made obvious by their name, these pipe flanges slip over the pipe. They’re manufactured with an inside diameter that is slightly bigger than the pipe’s outside diameter. These attachments are connected to the pipe via fillet weld at…

JULY FLASH SALE

JULY FLASH SALE 36’ 150# / 125# FF SO Flanges over stock from customer order. Sale price of $788.00 ea. Use promo code 73120. This offer expires on July 31, 2020

Carbon Steel Flanges vs. Stainless Steel Flanges

What are the most popular Grades of Forgings used in Flange Manufacturing? The first most common Forged materials used for the manufacture of Pipe Flanges are the following, in the Carbon Steel grades, A-105 (high temperature service max of 1000*F). The A-350 LF2 grades of material, (for lower temperature applications). A-694 Grades, F42 thru F70…

Ready to get started on your project?

Request A Quote